# gsw_SP_from_Sstar

`Practical Salinity from Preformed Salinity`

## USAGE:

`[SP, in_ocean] = gsw_SP_from_Sstar(Sstar,p,long,lat)`

## DESCRIPTION:

`Calculates Practical Salinity from Preformed Salinity.`
 ```Click for a more detailed description of calculating Practical Salinity from Preformed Salinity.```

## INPUT:

```Sstar  =  Preformed Salinity                                    [ g/kg ]
p      =  sea pressure                                          [ dbar ]
( ie. absolute pressure - 10.1325 dbar )
long   =  longitude in decimal degrees                    [ 0 ... +360 ]
or  [ -180 ... +180 ]
lat    =  latitude in decimal degrees north              [ -90 ... +90 ]```
```p, lat and long may have dimensions 1x1 or Mx1 or 1xN or MxN,
where Sstar is MxN.```

## OUTPUT:

```SP        =  Practical Salinity  (PSS-78)                   [ unitless ]
in_ocean  =  0, if long and lat are a long way from the ocean
=  1, if long and lat are in the ocean
Note. This flag is only set when the observation is well and truly on
dry land; often the warning flag is not set until one is several
hundred kilometres inland from the coast. ```

## EXAMPLE:

```Sstar = [34.7115; 34.8912; 35.0247; 34.8436; 34.7291; 34.7197;]
p =     [     10;      50;     125;     250;     600;    1000;]
lat =   [      4;       4;       4;       4;       4;       4;]
long =  [    188;     188;     188;     188;     188;     188;]```
```If the profile data refers to one location (one station) is it
acceptable to enter the station location once.
(i.e. the following will produce the same result as the input above).```
```Sstar = [34.7115; 34.8912; 35.0247; 34.8436; 34.7291; 34.7197;]
p =     [     10;      50;     125;     250;     600;    1000;]
lat =   4;
long =  188;```
`[SP, in_ocean] = gsw_SP_from_Sstar(Sstar,p,long,lat)`
`SP =                             in_ocean =`
```  34.548646570969929                  1
34.727538423586189                  1
34.860549501859502                  1
34.681006826476434                  1
34.568065697992346                  1
34.560023926979518                  1```

## AUTHOR:

`Trevor McDougall and Paul Barker        [ help@teos-10.org ]`

## VERSION NUMBER:

`3.05 (16th February, 2015)`

## REFERENCES:

```IOC, SCOR and IAPSO, 2010: The international thermodynamic equation of
seawater - 2010: Calculation and use of thermodynamic properties.
Intergovernmental Oceanographic Commission, Manuals and Guides No. 56,
UNESCO (English), 196 pp.  Available from the TEOS-10 web site.
See section 2.5 and appendices A.4 and A.5 of this TEOS-10 Manual.```
```McDougall, T.J., D.R. Jackett, F.J. Millero, R. Pawlowicz and
P.M. Barker, 2012: A global algorithm for estimating Absolute Salinity.
Ocean Science, 8, 1123-1134.
http://www.ocean-sci.net/8/1123/2012/os-8-1123-2012.pdf```
`The software is available from http://www.TEOS-10.org`